The Windows 10 May 2020 update is blocked on some devices because it can cause compatibility issues. Microsoft has identified some potential issues with certain third-party apps, drivers, and hardware configurations. As a safety measure, the update is automatically blocked on devices that may be affected by these potential issues to avoid creating bigger problems.

1. First, open RStudio and open or create a .Rmd file. 2. Create a code chunk for your Rmarkdown code by typing three curly braces, as shown below. ```{r} ``` 3. Now type your Rmarkdown code between the curly braces. 4. Once you have finished writing your code, save the file in the .Rmd format. Your code chunk and its contents will be saved in the file.

1. Disable Windows Applications: You can disable any unnecessary applications that you don't use to reduce the amount of memory used by your system. 2. Enable Write Caching: Write caching is a feature that improves overall disc performance. To enable this feature, go to Control Panel -> System and Security -> Administrative Tools -> Computer Management -> Devices and then right click on your Hard Disk and click Properties. Select the “Policies” tab and check the box labeled “Enable write caching on the disk.” 3. Increase Virtual Memory: Virtual memory is a portion of your computer’s RAM that is used when RAM is running low. To increase virtual memory, go to Control Panel -> System and Security -> System and then click on “Advanced system settings.” Select the “Advanced” tab and then click on “Settings” under the “Performance” section. Select the “Advanced” tab and then click on “Change” under the “Virtual memory” section. 4. Update your drivers: Outdated drivers can create conflicts and slow down your system. Make sure that all your drivers are up to date by going to Device Manager in Control Panel, right clicking on each driver and selecting “Update driver software”. 5. Defragment your Hard Drive : Fragmented data slows down your computer. To defragment your Hard Drive, go to Control Panel -> System and Security -> Administrative Tools -> Computer Management and then open “Disk Defragmenter.”

There are several ways to restore a backup in Windows 10 without losing data. 1. Restore a system image using the System Image Back-Up utility. This is a built-in feature of Windows 10 and you can use it to create a system image and then restore it at a later time. 2. Restore data from a Windows Backup. You can use Windows Backup to back up your personal files, settings, and system settings. These backups can then be used to restore your system to its previous state. 3. Restore from a partially corrupt backup. If your system backup is only partially corrupt, you can use the Windows System Restore feature to restore your system to a state before the corruption occurred. 4. Restore from a restore point. If you have created a restore point, you can use it to restore your system to the state it was in when the restore point was created. 5. Use a third-party data recovery tool. If all else fails, you may need to use a third-party data recovery tool to recover your data if the backup is too corrupted to be restored.

Depending on your version of Windows, the Google Chrome profile location can vary. Generally, you can find it in the following locations: Windows 10 (64-bit): C:\Users\[YOUR USERNAME]\AppData\Local\Google\Chrome\User Data\Default Windows 10 (32-bit): C:\Program Files (x86)\Google\Chrome\Application\User Data\Default

1. Connect the external drive to your Windows 10 PC 2. Select the Start button, then select File Explorer 3. Right-click the external drive and select Format 4. In the Format window, select exFAT in the File system menu, type a name for the drive in the Volume label text box, then select Start 5. When you see the “Your drive is ready to go” message, select OK 6. Close the Format window, then your external drive is ready to use with exFAT format.1. Connect the external hard drive to your computer. 2. Open File Explorer and locate the external hard drive. It should show up as a separate drive in the main window. 3. Right-click the drive and select the Format option. 4. Choose the file system you want to use from the File System drop-down menu. This determines the type of files that can be stored on the drive. 5. Set the Allocation unit size to the default. This value is set to give the best performance for your system. 6. Enter a Volume Label of your choosing, this will help identify the drive later. 7. Click Start and wait for the process to complete. 8. When formatting is finished, the drive will be ready to use.x = 91. Plug the external hard drive into your computer and make sure it has been detected by Windows 10. 2. Open the File Explorer. Right-click on the external hard drive icon and select 'Format.' 3. Select the File System you wish to apply to your external hard drive (typically NTFS or exFAT). You may also give it a name by typing in the Volume Label box. Click the 'Start' button to start the formatting process. 4. Wait for the formatting to complete and your external hard drive will now be ready to be used.1. Connect the external hard drive to your computer using a USB cable. 2. Open your computer's File Explorer. 3. Look for the external hard drive in the list of storage devices. 4. Right-click on the external hard drive and select Format. 5. Choose the desired format, such as FAT32 or NTFS, and then click Start. 6. Confirm your choice to begin the formatting process. 7. Wait until the formatting process is complete.1. Start by connecting your external hard drive to your PC. 2. Open the Start menu and search for “File Explorer”. 3. Click on the File Explorer icon to open it. 4. Click on “This PC” in the left pane. 5. Your external hard drive should be listed on the right pane, under “Devices and drives”. 6. Right-click on the external hard drive and select “Properties”. 7. This will show all the details and specs of your external hard drive.

1. Download and install the Partition Wizard (or other hard drive management software). 2. Connect the external hard drive to your computer. 3. Open the software and select the external hard drive that you want to format. 4. Select “Format Partition” from the menu. 5. Choose your file system, such as NTFS, FAT32, or exFAT. 6. Confirm your selection and start the formatting process. 7. Wait until the process is finished and your external hard drive is formatted.

1. Open Control Panel and then click on 'Programs' and then click on ‘Turn Windows features on or off’. 2. Scroll down to Internet Information Services and check the box next to it. 3. Next, click on 'Details' and then choose which components of IIS you would like to install (e.g. Web Management Tools, World Wide Web Services, Application Development Features). 4. Once you have finished making your selections, click 'OK' and then wait for the installation to complete. 5. Optionally, you can choose to configure IIS settings in the IIS manager once installation is complete. 6. Finally, restart your computer and the web server will be ready to use.

1. Open the Settings app and navigate to Devices > AutoPlay. 2. Turn on or off the toggle switch to enable or disable AutoPlay. 3. Select the dropdown menu next to a file type (e.g. Photos, Music, Videos) and choose what you’d like your PC to do when you plug in a device or connect to a network. 4. Select 'Take no action' to disable AutoPlay for any specific file type. 5. Press the 'Save' button to save your changes.

1. Click the Windows icon on the bottom left side of the screen, and type "notepad" into the search bar. 2. Click on the Notepad application to open it. 3. Once Notepad is open, type in the commands or instructions that you want to include in the batch file. 4. Once your commands or instructions have been typed into Notepad, click "File" in the top left corner. 5. Under the File menu, click on "Save As". 6. In the Save dialog box, in the "File name:" field, type in the name that you want to give to the batch file and then add a ".bat" extension. 7. Select the folder on your computer where you would like to save your batch file. 8. Ensure that the "Save as type:" field is set to "All Files". 9. Click on the "Save" button. Your batch file has now been created and should appear in the selected folder.