How to find router IP Windows 10?
1. Navigate to the “Start Menu” and search for “Command Prompt”. 2. Right-click on the “Command Prompt” search result and select “Run as administrator”. 3. In the “Command Prompt” window, type “ipconfig” and press the “Enter” key. 4. Look for the “Default Gateway” IP address, this is usually the IP address of your router.
How to install Windows Subsystem for Linux on Windows 10?
1. Open the Start menu and type regedit in the search box. Hit Enter. 2. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ 3. Right-click on the registry key and select New > DWORD (32-bit) Value. 4. Type “EnableTheming” and press Enter. 5. Set the value to ‘0‘ by double-clicking the new registry key. 6. Navigate to the following registry key: HKEY_CURRENT_USER > Software > Policies > Microsoft > Windows. 7. Create a new key named “WindowsSubsystemForLinux” and then inside that key create a DWORD (32-bit) value named “Enabled” and set its value to ‘1‘. 8. Open the Windows Store app and search for Windows Subsystem for Linux and install the Windows Subsystem for Linux feature. 9. Reboot your computer. 10. After the reboot, execute the command “bash.exe” from the Command Prompt and you should be good to go!
How to fix PC volume too low in Windows 10?
1. Check the Volume Settings in Windows 10 Right click on the speaker icon in the system tray and select “Open Volume Mixer.” On the Volume Mixer panel, ensure all the applications are set to the same level (usually maximum) and make sure that nothing is muted. 2. Check the Hardware Volume Settings Right click on the Volume icon > Recording devices > right click on Microphone or Line-in > Properties > Enhancements Tab. Check the "Loudness Equalization" option and toggle it on or off. 3. Use a Driver Updater If volume settings and hardware volume settings didn't work, then you can try updating your sound drivers (e.g Realtek Audio Drivers) with a suitable driver updater software such as IObit Driver Booster. This should sort out any sound-related issues on the system.
What is the keyboard shortcut to switch between virtual desktops in Windows 10?
The keyboard shortcut to switch between virtual desktops in Windows 10 is Windows key + Ctrl + Left/Right Arrow.
How to check network adapter speed in Windows 10?
1. Right-click the Start button and select “Network Connections”. 2. Right-click the network connection you want to check and select “Status”. 3. Select the “Details” tab in the Status window. 4. Find the “Speed” heading to view the network adapter speed.
How to speed up WiFi internet on Windows 10?
1. Move your router: Place your router in a more open and central location, away from walls and obstructions, so that it can send/receive signals more easily. 2. Update the router's firmware: Keeping the router's firmware up-to-date helps improve performance and security. 3. Turn off unused network devices: This can help reduce interference from other wireless devices in your home. 4. Check for congestion: If you are in a shared environment (such as an apartment) with other people using the same ISP, then there may be too much congestion on the public channel, which could affect your internet speed. 5. Change the channel: Try using a different WiFi channel to improve your connection. 6. Reduce background applications: Close any applications in the background that use the internet. 7. Utilize an ethernet connection: If available, try using an ethernet cable to connect your computer directly to the router instead of over wireless. This can provide a more stable and direct connection. 8. Change Wi-Fi band: Some routers have both 2.4GHz and 5GHz bands. If available, try connecting your devices to the 5GHz band for faster speeds and better performance.
How to fix Network Discovery in Windows 10?
1. Check Firewall Settings To ensure Network Discovery is working properly, the Windows Firewall should have incoming port 445 (used by SMB protocol) enabled and open. You can check your firewall settings by going to Settings > Network & Internet > Advanced Options. 2. Enable Network Discovery Go to Settings > Network & Internet > Advanced Options, then click the toggle to turn on Network Discovery. Make sure the “Private” and “Guest or Public” options are enabled as well. 3. Verify Services Go to the Services console (run the ‘services.msc’ command) and make sure the “Function Discovery Resource Publication”, “SSDP Discovery” and “UPnP Device Host” services are running. 4. Reset Network Settings If all else fails, try resetting your network settings. This will reset your IP address and other network-related settings. To reset your network settings, go to Settings > Network & Internet > Network Reset, then click the Reset Now button.
How to share files without HomeGroup on Windows 10?
1. Use File-Sharing Software: This is the most common way to share files between multiple computers. You can use file-sharing software such as Dropbox, Google Drive, Microsoft OneDrive, Apple iCloud Drive, etc. to sync files across multiple computers. 2. Use a USB Flash Drive: This is one of the most straight-forward ways to share files between two computers. All you need to do is plug the USB flash drive into one of the computers and copy the necessary files and then plug it into the other computer to access the files. 3. Set Up Network Sharing: You can also set up a network where you can share files and folders across multiple computers. All you need to do is set up a network, enable file and folder sharing, create user accounts and then share the files and folders that you want to share between the computers. 4. Use an External Hard Drive: This is also a great way to share files between multiple computers. All you need to do is plug your external hard drive into one of the computers and copy the files and folders that you want to share and then plug it into the other computer to access the files.
How to enable and create Restore points in Windows 10?
Creating Windows 10 system restore points is a straightforward process. It is always a good idea to create one before installing any software or making changes to your system. Here’s how you can do it: 1. Open the Control Panel by searching for it in the Windows 10 search box. 2. In the Control Panel, click on System and Security, then System to access the System settings. 3. Select System Protection from the left-hand side menu. 4. Choose the hard drive where you’d like to store the restore points. 5. Check the box next to the hard drive and click on Configure. 6. Select the Restore system settings and previous versions of files option and choose a maximum disk space usage limit for your restore points. 7. Finally, click on Apply to save the changes and create a restore point. You can check if it worked by clicking on System Restore in the System Protection window. You should see a list of recent restore points.
Does Windows 10 automatically create Restore points?
Yes, Windows 10 automatically creates system restore points. System restore points are created when an important system event occurs, such as when an app or driver is installed. It can also be manually triggered by users.


How to backup and install Windows 10?
Backing up Your Windows 10 System: 1. Open the Windows settings menu by pressing the Windows key + I 2. Select Update & Security 3. Choose the option “Backup” 4. Select “Go to Backup and Restore (Windows 7)” 5. In the Backup and Restore window, click on “Create a system image” 6. Choose where you want to save the image and click Next. 7. Set your preferred backup settings and click “Start backup”. Installing Windows 10: 1. Download the Windows 10 software from the Microsoft website. 2. Insert the USB drive with the software on it into your PC. 3. Reboot your PC. 4. In the boot menu, select the option to boot from USB. 5. Walk through the setup, agreeing to the terms, selecting the drive to install to and settings preferences. 6. When the setup is complete, remove the USB drive and reboot. 7. Windows 10 should now be installed on your PC.
how to pause updates windows 10
1. Open Windows Update 2. Click on Advanced options 3. Select Pause updates 4. Select pause for up to 35 days You can also turn off automatic updates altogether if you prefer by going to Settings > Update & Security > Windows Update > Advanced Options and turning off the toggle switch under "Give me updates for other Microsoft products when I update Windows".
How to split screen Windows 10?
1. Open the first window you want to view and position it to fill the left half of the screen. 2. Open the second window, and then press and hold the Windows button and the left arrow key on your keyboard at the same time. The second window should fill the right half of the screen. 3. If you want to adjust the size of the windows, you can use your mouse to drag the divider between the two windows. 4. To return to a single window, press and hold the Windows button and the right arrow key on your keyboard at the same time.
How to disable nofolderoptions in Windows 10?
NoFolderOptions is a Windows registry setting that prevents users from accessing the folder options menu in File Explorer. To disable it, open the Run dialog by pressing the Windows Key + R keys, type “regedit” and press enter. Browse to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies and locate the NoFolderOptions value. Double click on the value and set it to 0. Close the Registry Editor and restart the computer for your changes to take effect.You can enable/disable Folder Options in the File Explorer Options window. 1. Open File Explorer and go to View > Options. 2. Select the View tab in the File Explorer Options window. 3. Here, you can toggle between displaying folder contents with or without the Folder Options. 4. Click Apply or OK when you're done.1. View: Select the view you want to use to show your files, such as Details, Tiles, Content or List. 2. Group by: Choose how to organize files, including options such as name, date, type and size. 3. Sort by: Set the order to sort your files by names, size, type, date modified, or a custom sort. 4. Layout: Arrange the items in your folder in several ways, such as Large Icons, Medium Icons, Small Icons, Details, List, Tiles or Content. 5. Search: Set the search options in the current folder. 6. Item Check Boxes: Choose to show check boxes (selected for copy, move, or delete) beside each item in the folder. 7. Hide File Extensions: Uncheck to show more detail in filenames and in lists of files. 8. Privacy: Check the box to show file descriptions and content preview in the data window. 9. Hide Menus: Check the box to hide common commands in folders and drives. 10. Show Preview Handles in Folders: Check the box to show handles in the folder so users can preview files without opening them.Folder options can be removed from Windows 7 in three ways: 1. Disable the folder Selection from Group Policy Editor: Open the Group Policy Editor by typing gpedit.msc into the command prompt. Go to User Configuration > Administrative Templates > Windows Components > Windows Explorer. Right-click on the Disable and hide specified Control Panel items option, select Edit and enter Folder Options into the Show Contents window. Press OK and the Folder Options will be removed from the Control Panel. 2. Use Regedit Editor: Open the Regedit Editor by typing regedit into the command prompt. Go to HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer. Right-click on the value named NoFolderOptions and set it to 1. This should disable the Folder Options in Windows 7. 3. Stop the Windows Explorer process: Open the Task Manager by pressing Ctrl+Shift+Esc. Go to the Processes tab and find explorer.exe. Right-click on it and select End Process. This will stop the Windows Explorer process, thus disabling Folder Options.1. Open File Explorer. 2. Click the View tab at the top. 3. In the "Show/hide" section, check the box next to "Hide folders, drives, and devices without media." 4. Click OK.
Why is my computer not updating to Windows 10?
There are several reasons why your computer might not be updating to Windows 10. If your computer is running an older version of Windows, like Windows XP or Vista, it might not be compatible with Windows 10. Your computer might not meet the minimum requirements to install and run Windows 10, or it might not have the necessary drivers to handle new features in Windows 10. Additionally, your computer might lack storage space. Windows 10 requires a large amount of storage space, so your computer might not have enough to accommodate the installation or update. Finally, you might not have enabled automatic updates on your computer. To install Windows 10, you must manually check for updates and install them.
How to turn off real-time virus protection on Windows 10?
1. Start by opening the Windows Security app. You can search for it by pressing the Windows key + Q and typing “Windows Security”. 2. Click on “Virus & threat protection”. 3. Under the “Virus & threat protection settings” section, click on “Manage settings”. 4. Under the “Real-time protection” section, toggle the switch to “Off”. 5. A prompt will appear asking if you’re sure you want to disable real-time protection. Click “Yes”. 6. You will now see that real-time protection is disabled.